English
- 中文版
- English

Products

DY50/80PS tractor front drive axle

Classify：

Summary： Suitable for four-wheel drive tractors in the 50-80 horsepower range (suitable for both paddy fields and dry fields);

Keywords：

Message

Detailed introduction

Performance Characteristics
Suitable for 50-80 horsepower four-wheel drive tractors (suitable for both paddy fields and dry fields);
Super strong mud and water prevention design, significant advantages in paddy field operation, fully meeting the needs of paddy field operation;
Internal structure includes central deceleration, transmission differential and end double bevel gear steering;
Precise internal transmission design meets the requirements of long service life;
Increased ground clearance improves the passability of the tractor;
Front-mounted, centrally-located oil cylinder, independent oil circuit, full hydraulic front wheel steering, turning angle ≤55°;
The use of high-standard components, easy maintenance, saves parts space for users and dealers;
Reasonable component design does not require the use of special tools for maintenance, ensuring direct and rapid service.

Performance Parameters

Transmission Ratio	12.76/14.53/16.26
Front Axle Drive Shaft	Centrally Located Drive Shaft
Input Shaft Key Parameters	m=2 z=12 α=30°
Wheel Hub and Flange Connecting Bolts	6-M14×1.5-6H（Ф101.7×Φ161mm）
Wheel Track (mm)	960/1100/1200/1300
Front Wheel Camber	2°
Kingpin Inclination	12.5°
Front Wheel Alignment: Kingpin Rake	0°
Front Wheel Toe (mm)	0~5
Steering Type	Front Wheel Steering
Front Axle Swing Angle	12° (each side)
Maximum Front Wheel Turning Angle	50°
Cylinder Type	Center-mounted Cylinder
Steering Cylinder: Diameter (mm)	Φ55
Total Stroke (mm)	248